VIPA
Elektronik-Systeme GmbH in Liqu.

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

PERMANENTLY CLOSED


NEWS

Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
VISUALIZATION >> VIPA TD and OP-Texptanels

OPERATOR SYSTEMS

TD/OP-Textpanels

VIPA TEXT DISPLAY

The TD03 is a small, compact text display for showing messages about current working conditions, for changing process parametres and setting flags with the built-in buttons. An S7®-MPI port can be used to connect it to all Siemens S7-300/400® PLCs and VIPA series 100/200/300V PLCs.
The configuration is done with the VIPA TD-Wizard. The generated parameters and data blocks are directly loaded in the PLC. The TD itself contains no project data.
Operater_Panel_TD_03.jpg
VIPA 603-1TD00
TD03-text display , 2x20 sign, LCD, 4 F-buttons + Shift, Up/Down
Arrow keys, ESC, ENTER, text memory in PLC (data block), Project development by TD-Wizard.
Interface: MPI.
Suitable for VIPA 100/200/300V and Siemens S7-300 / 400.
Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g, mounting: in the device integrated, captive rocker arms.
Supply: 18-32VDC/120 mA. Including MPI connection cable to the PLC VIPA 950-0KB50, Length 2.5 m with PG and diagnosis jack.

VIPA OPERATOR PANEL

The operator panel OP03 can be programmed by ProTool SW or OP Manager. It serves for the comfortable display and update of process values and the output of messages. An S7®-MPI port can be used to connect it to all Siemens S7-300/400® PLCs and VIPA series 100/200/300V PLCs.
Up to 7 OPs are connectable at the same time to a PLC. As a specific feature the STEP®7 functions StatVAR and SteuVAR are implemented. For project transmission, the VIPA Greencable 950-0KB00 is used.
Operater_Panel_OP_03.jpg
VIPA 603-1OP00
TD03-text display OP03, 2x20 chars, LCD, 4 F-buttons, Numeric
Block, ±, arrow keys, ESC, ENTER. Project memory: 256kByte project programming via ProTool by Siemens, interface: MPI
Suitable for VIPA 100/200/300V, Siemens S7-300/400.
Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g, mounting: in the device integrated, captive rocker arms.
Supply: 18-32VDC/120 mA.
Including MPI connection cable to the PLC VIPA 950-0KB50,
Length 2.5 m with PG and diagnosis jack.

PROJECT DEVELOPMENT

The project development for the TD03 is done with TD-Wizard, that generates one DB, which holds the suitable data after the registration of the TD03 through an SFC.
Projektierung.jpg

PROJECT DEVELOPMENT

The project development of the OP03 can be done with the OP manager of VIPA. Here, even complicated navigations can be realized. The OPManager has an integrated emulator which helps you to check all functions without additional HW on an emulated panel. The transfer of the project can be done with MPI. It is also possible to use Protool by Siemens.
VIPA SW300 O1LA OP-Manager
Programming-Tool for OP03
OP_Manger.jpg
Masse_Panels_E.jpg
Green_Kabel.jpg
VIPA 950-0KB00
VIPA Green Cable programming cable for TD/OP03 and PG/AG download cable for VIPA 100/200/300V.