VIPA
Elektronik-Systeme GmbH in Liqu.

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

PERMANENTLY CLOSED


NEWS

Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
PLC >> VIPA 300S CPUs

SPEED7-TECHNOLOGY - compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

SPEED7_powered.jpg

SPEED7 by VIPA - very fast STEP®7/

TIA-programmable CPUs

VIPA CPUs and peripheral modules with the instruction set S7-300® by Siemens are more than 20 times faster than the similar S7-300® products. VIPA offers SPEED7, the technology of tomorrow, based on a million times proven STEP®7-programming platform. A flexible memory management covers all possible applications from 64kByte to 1MByte. Program and data are stored in one memory, no extra loading memory is necessary. A pluggable MMC/SD-Card-Card allows configuration as well as project and data saving in a FAT16 format compatible with PC.
Ethernet for PG communication, online maintenance and OP communication are always on Board (PtP). The well known serial system bus from the S7-300® series by SIEMENS is completely supported and allows the use of the S7-300® units of SIEMENS and VIPA. All important certifications exist. The complete STEP®7/S7-300® command set is available and was tested for full accuracy, examined from an independent Test institute in extensible test rows.
CPU_312SC.jpg
                 SPEED7-CPUs
Order No.:
                                                         Technical data
VIPA 312-5BE23
CPU 312SC-SPEED7 technology DC 24V, incl. 128kByte (up to 1MByte),
MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 8DO 24VDC/0,5A,
2x counter (10Khz) RS485 interface with library for ASCII, STX/ETX, 3964R,
Modbus master protocols, Ethernet interface for PG/OP communication.
HW identification: 6ES7312-5BE03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
CPU_313SC.jpg
            SPEED7-CPUs
Order No.:
                                                       Technical data
VIPA 313-5BF23
CPU 313SC-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),
MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A,
AI 4x 12Bit(U/I), 1x 12Bit (PT100), AO 2x 12Bit (U / I), 3x counter (30Khz),
RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols,
Ethernet interface for PG/OP communication.
HW identification: 6ES7313-5BF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-uni t per line
CPU_313SCDPM.jpg
                SPEED7-CPUs
Order No.:
                                                       Technical data
VIPA 313-6CF23
CPU 313SC/DPM-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),
sMPI interface, SD slot, clock, 16DI, 16 of it for alarming, 16DO 24VDC/0,5A,
3x counter (30Khz), PROFIBUS-DP master/slaves with 12Mbps and up to 125 slaves,
alternative RS485 interface with library for ASCII, STX/ETX, 3964R,
Modbus master protocols, Ethernet interface for PG/OP communication.
HW identification: 6ES7313-6CF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
CPU_314SCDPM.jpg
                 SPEED7-CPUs
Order No.:
                                                      Technical data
VIPA 314-6CG23
CPU 314SC/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2MByte),
MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A
+8 DI/O in adition, AI 4x12Bit(U/I), 1x 12Bit (PT100), AA 2x 12Bit (U / I), 4x counter (60Khz),
PROFIBUS-DP master/slave with 12Mbps and up to 125 slaves, alternative RS485
interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols,
Ethernet interface for PG/OP communication.
HW identification: 6ES7314-6CG03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

MEMORY CONFIGURATION CARDS

VIPA MCC offers the possibility to extend the RAM of Speed7 CPUs. The MCC is a specifically prepared MMC (multimedia Card). Plug the MMC into the card slot and execute an overall reset and the extension becomes available. The MCC must remain plugged in, otherwise the CPU switches to STOP after 48 hrs.
The MCC cant be exchanged to a MCC with the same memory configuration, but it can be used for the project backup (Copy RAM > ROM). The shown MCC memory value increases the already available basic memory of the CPU by the value of the card. However, the maximum memory shown of the CPU cant be overridden, even if a bigger memory extension is plugged in.
MEMORY CONFIGURATION CARD
Order No.:
                Additional memory extension:
VIPA 953-1LE00
32kByte (16kByte program / 16kByte Daten)
VIPA 953-1LF00
64kByte (32kByte program / 32kByte Daten)
VIPA 953-1LG00
128kByte program / 64kByte Daten)
VIPA 953-1LH00
256kByte (128kByte program / 128kByte Daten)
VIPA 953-1LJ00
512kByte (256kByte program / 256kByte Daten)
VIPA 953-1LK00
1MByte (512kByte program / 512kByte Daten)
VIPA 953-1LL00
2MByte (1MByte program / 1MByte Daten)
VIPA 953-1LM00
4MByte (2MByte program / 2MByte Daten)
VIPA 953-1LP00
8MByte (4MByte program / 4MByte Daten)
953-1LK00.jpg
All cards have a minimum capacity of 512MByte and can be used additional for programm backup.
953-0KX10.jpg
VIPA 953-0KX10
MMC flashcard, 512MByte, only for program back up, recommended if no MCC-Card is used.
SPEED7_powered.jpg

SPEED7 BY VIPA VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs

VIPACPUs and peripheral modules with instruction set S7-300®/S7-400® by Siemens are faster than the currently strongest S7-300®, S7-400® systems. VIPA offers Speed7, the technology of tomorrow, based on a million times proven Step®7-programming platform. A flexible memory management covers all possible applications from 64kByte to 8MByte. Program and data are stored in one memory, so no extra loading memory is necessary. A pluggable MMC/SD-Card allows configuration as well as project and data security in a FAT16 format compatible with PC.
PROFIBUS-DP master or optional master CANopen and Ethernet for PG communication, on-line maintenance and OP communication are always on Board (PtP). In addition, an EthernetCP is able to become integrated directly into the CPU cabinet, compatible with CP343, 10/100Mbps.
The well known serial system bus from the S7-300® series by Siemens is completely supported and allows the use of the S300® units of SIEMENS and VIPA. Not only are 8 modules able to be switched on, but also the CPUs support to drive up to 32 modules in a line.
All relevant certifications exist. The complete Step®7/S7-300®/400®er command set is available and has been examined by an independent test institute in
VIPA315SB.jpg
VIPA315SN.jpg
       SPEED7-CPUs
Order No.:
                                                    Technical data
VIPA 314-2BG23
CPU 314SE/DPS-SPEED7 technology, DC 24V, incl. 256kByte (up to 1MByte),
MPI-interface, SD-slot, clock, Ethernet interface for PG/OP communication,
PROFIBUS-DP-Slave or RS485, PtP-Communication for ASCII-, STX/ETX-, 3964R-,
ModbusRTU master protocol with library. 32 I/O-units per line.
HW identification: 6ES7315-2AG10-0AB0/V2.6 + 6GK343-1EX11-0XE00
VIPA 314-2AG23
CPU 314SB/DPM-SPEED7 technology, DC 24V, incl. 512kByte (up to 1MByte,
MPI interface, SD slot, clock, Ethernet interface for PG/OP communication,
PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line.
HW identification:  6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA 315-2AG23
CPU 315SB/DPM-SPEED7 technology, DC 24V, incl. 1MByte (up to 4 MByte),
MPI interface, SD slot, clock, Ethernet interface for PG/OP communication,
PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line.
HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA 315-4NE23
CPU 315SN/NET-SPEED technology, DC 24V, 1MByte (up to 4MByte, MPI interface,
SD slot, clock, Ethernet interface for PG/OP-Communication, PROFIBUS-DP master,
12MBd, up to 125 Slaves, add. integrated Ethernet-CP 343 with RFC1006,
TCP/IP and S7 communication for 8 connections. 32 I/O-units per line.
HW identification: 6ES7317-2AK14-0AB0/V3.3 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA 315-4PN23
315SN/NET-SPEED7 technology, DC 24V, incl. 1MByte (up to 2 MByte),
MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication,
PROFINET- & PROFIBUS-DP master, additional integrated Ethernet-CP 343 with RFC1006,
TCP/IP and S7 communication for 8 connections, 32 I/O-units per line.
HW identification: 6ES7315-2EH14-0AB0 / V3.2 + 6GK343-1EX11-0XE00
VIPA 315-4PN43
315SN/NET-SPEED7 technology, DC 24V, incl. 512kByte, MPI interface, SD slot, clock
Ethernet interface for PG/OP-Communication, PROFINET-master, additional integrated 
Ethernet-CP 343 with RFC1006, TCP/IP and S7 communication for 8 connections, RS485 interface
with library for ASCII, STX/ETX, 3964R, Modbus master protocols. 32 I/O-units per line.
HW identification: 6ES7315-2EH14-0AB0 / V3.2 + 6GK343-1EX11-0XE00
VIPA314ST_317SN.jpg
                    SPEED7-CPUs for SPEED-BUS
Order No.:
                                                     Technical data
VIPA 314-6CF23
CPU 314ST/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2 MByte),
MPI interface,SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,
DI 8-16 / DO 8-0, AI 4, AO 2, 1 PT100, 4 counters (100 kHz),
PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per line.
HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA  317-2AJ23
CPU 317SE/DPM-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte),
MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,
PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves,32 I/O-units per line.
HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA 317-4NE23
CPU 317SN/NET-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, 
SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP 
 master, 12MBd, up to 125 Slaves, additional integrated Ethernet-CP 343 with RFC1006, 
 TCP/IP, S7 communication for max. 64 connections. 32 I/O-units per line.
HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00
On request HW identification: 6ES7318-2AJ00-0AB0/V3.0
VIPA 317-4NE23
CPU 317SN/NET-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), 
MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, 
PROFINET & PROFIBUS-DP-Master additional integrated Ethernet-CP 343 with RFC1006,
TCP/IP, S7 communication for max. 16 connections. 32 I/O-units per line.
HW identification: 6ES7317-2EK14-0AB0 / V3.2 + 6Gk343-1EX11-0XE00
VIPA322_342_343.jpg
 SPEED BUS PERIPHERAL MODULES
Order No.:
                                 Technical data
VIPA 342-1CA70
SPEED-Bus, CANopen master RS485, 320 Bytes, up to 127 CAN knots.
VIPA 342-1DA70
SPEED-Bus, PROFIBUS-DP master RS485, 12 MBaud, up to 125 Slaves.
VIPA 342-2IA71
SPEED-Bus, 2x interbus master, 2x RS422, Dual port master,
up to 512 subscribers, number of the process data: In 1920 binary I/Os.
VIPA 343-1EX71
SPEED-Bus, CP343S TCP/IP-Ethernet CP, S7 communication,
RFC1006, H1, TCP/IP, UDP, up to 16 connections.
VIPA 321-1BH70
SM 321S-FAST SPEED-Bus, digital input DI 16xDC 24V,
2,56µs to 40ms adjustable.
VIPA 322-1BH70
SM321S-FAST SPEED-Bus, digital output TH 16x DC 24 V, 0.5A, 100kHz.
VIPA 323-1BH70
SM 321S-FAST SPEED-Bus, digital input DI/O 16xDC24V, digital output
DO 0,5A, 100 kHz, 2.56 µs to 40ms adjustable.
VIPA 331-1AF70
SM 331S-FAST SPEED-Bus, analog supported input AI 4x 16Bit, 100µsec per channel,
+/- 20mA, adjustable 32 kByte cache memories per channel after trigger.
VIPA 331-1BF70
SM 331S-FAST SPEED-Bus, analog input AI 8x16Bit, 100 µs per channel,
+/-10 V, adjustable 32 kByte cache memory per channel after trigger.
Order No.:SPEED BUS POWERSUPPLY
VIPA 307-1FB70
PS307 power supply unit, only for SPEED-BUS units, input:110...240VAC, Output: 24VDC, 6...12A
CPU_Schienen.jpg
Order No.:
SPEED BUS PROFILE RAILS
VIPA 391-1AF10
530 mm for 2 high-speed extension slots
VIPA 391-1AF30
530 mm for 6 high-speed extension slots
VIPA 391-1AF50
530 mm for 10 high-speed extension slots
VIPA 391-1AJ10
830 mm for 2 high-speed extension slots
VIPA 391-1AJ30
830 mm for 6 high-speed extension slots
VIPA 391-1AJ50
830 mm for 10 high-speed extension slots