VIPA
Elektronik-Systeme GmbH in Liqu.

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

PERMANENTLY CLOSED


NEWS

Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
COMMUNICATION >> INSYS icom MIRO-L100 Compact mobile router

SMART IOT GATEWAYS

MIRO-L100 Compact mobile router

MIRO simply industrial

Compact. Easy. Secure.

The MIRO series from INSYS provides secure and stable routing in a very compact device for an attractive price. The mobile routers are suitable for secure Internet connections and remote maintenance, and impress with their high system stability, durability and ease of use.
MIRO_Tab-Left.jpg
Miro_Tab-Right.jpg
Miro_L-100RS.jpg
L-100_aufSchiene.jpg
MIRO_hoch.jpg
Mobile communication
Frequency bands, 

data rate
4G/LTE*: 700, 800, 900, 1.800, 2.100, 2.600 MHz (Bänder 1, 3, 7, 8, 20, 28A); 
3G/UMTS/HSPA:  900, 2.100 MHz (Bänder 1,8), HSDPA/HSUPA  (DL: max.42 Mbps, UL: max.5,7 Mbps)
LTE Cat. 1 (DL: max. 10 Mbps, UL: max. 5 Mbps)
Antenna connection1x SMA female
SIMSlot for 1 Mini-SIM card (2FF), locked Provider redundancy with multi-roaming SIM cards (see section Suitable accessories)
Cellular StatusSignal field strength, RSSI, RSCP / Ec/No, RSRP / RSRQ, Cell-ID, Location-ID
Hardware interfaces

Ethernet ports / functions
1 x RJ45 shielded, 10/100 MBit/s, Full/half duplex, Auto MDI-X, 1.5 kV isolation voltage / link up/down detection
I/Os
1 digital input or output, configurable: Input low active (contact input) or output open drain (24 V / 50 mA)
Displays (LEDs)
Power, WAN (Internet connection), Info (configurable), Signal (mobile communication)
Network

Network functions
5 local IP networks, IP static/DHCP,TCP, UDP, IPv4, IPv6, NTP, DHCP, DNS, HTTP/S, ARP, SSH, 802.1Q VLAN incl. tags and trunk ports
Service
DHCP Server v4/v6 per IP network, DHCP relay, NTP server, DNS, DynDNS, IPv6 Router Advertiser
Routing
Static routing, routing priority, RSTP, dynamic routing (OSPF, BGP, RIPv1, RIPv2, RIPng)
Connection check /DSL
Periodic, ping/icmp, DNS request, link up/down / external DSL modems: PPPoE
NAT / PAT
SNAT/DNAT (masquerade, netmapping, port forwarding, IP forwarding) unlimited number of rules
VPN

icom Connectivity SuiteSupports VPN service for remote maintenance, remote access and M2M-communication
OpenVPN
Client/server, several parallel tunnels, server with up to 20 clients, tls-auth/tls-crypt, dead peer detection (DPD)
Open VPN encryption

Blowfish 128 Bit, DESX 192 Bit, DES 64 Bit, DES EDE 128 Bit, DES EDE3 192 Bit, AES 128-256 Bit, 
RC2 40-128 Bit, IDEA 128, CAST5 128 Bit, SHA1, SHA 224-512
IPsec
IKEv1, IKEv2 (automatic, fix), several parallel tunnels, pre-shared keys, certificates, tunnel mode, transport mode, dead peer detection (DPD)
IPsec encryption
DES EDE3 192 Bit, AES 128-256 CBC/GCM, SHA1, MD5, SHA 256-512, DH-Group 1-31 (Diffie-Hellman 768 - 25519), ChaCha20-Poly1305
GRE
 GRE via IPsec, point-to-point, multipoint
PPTP / Dynamic VPN
PPTP client/server; PAP/CHAP/MS CHAP/MS CHAP V2; MPPE 40-128 / Dynamic multipoint VPN (GRE, IPsec, NHRP, EIGRP, OSPF, RIPv1/v2, BGP)
IT security

Authentication
Pre-shared key, X.509 certificates, RADIUS, access rights (read, write, status)
Firewall / netfilter
IP filters (stateful firewall) also in VPN tunnel; packet filter: TCP, UDP, ICMP, ESP, AP, GRE; MAC filter; pre-defined firewall rules can be activated
Security

Booting signed firmware, HTTP/HTTPS attack prevention; response upon events:
configuration change, link up/down, restart, login attempt, netfilter violation, password hashing
Events & Actions

Event & Action Handler
Notification, alarming, diagnosis, attack detection, fault handling, operation and commissioning logic
Events / alarms (selection)

Change: digital input, Ethernet port, WAN chain, profile status, supply input (with MRX), cellular field strength;
timer expired, firewall violation, login attempt detection, pulse sequence on digital input, counter, netfilter rule
Event-triggered actions (selection)

Messages via e-mail, SMS (only cellular variants), SNMP traps, MCIP; switch profile, switch connection, change modem state,
start timer, switch output or pulse sequence, activate firmware, reset
Monitoring and Management

Monitoring / Certificate management
SNMP traps and agent, configurable system logs, remote syslog, link up/down detection, netfilter violation / SCEP, CRL
icom Router Management

Supports central router management for FW updates, configuration management, connection monitoring mass rollout, certificate management,
available as public/private cloud (server) installation or onPremises
Administration

Configuration

Web Interface HTTP(S) with session management, command line interface (CLI), Telnet, SSH, configuration profiles as ASCII and binary file, 
ample configuration profiles event-triggered, REST API
Diagnosis tools
Ping / icmp, tcpdump, traceroute, DNS lookup, AT commands, port mirroring
FW update
Inkrementell, fail save, update server (HTTP, FTP, HTTPS, FTPS), icom Router Management (WebSocket)
Help / System time
Web interface: inline help, online help; example profiles, plausibility check, Configuration Guides / NTP client and server, buffered real time clock
Supply

Voltage / Power consumption
12 ... 24 V DC (± 20% 9,6-28,8V) / Typical approx. 1,5 W, max. 5,0 W
Dimensions /Weight
26 x 77 x 99 mm (W x D x H) / 91g
Mounting
DIN rail mounting, division units on DIN rail mounting: screw mounting via holes in the housing / module
Ambient conditions

Operating temperature / Humidity
-40 . +75°C 1)  / 0 95% (non-condensing)
Protection class
Housing: IP40
Certifications / EMV / Safety
CE / Emission: EN 55032 Class B, EN 61000-6-3; Immunity: EN 55024, EN 61000-6-2 / IEC/EN 62368-1
Environmental

Vibration/shock as per PLC standard  DIN EN 61131-2
Temperature tests as per EN 60068-2-1, EN 60068-2-2, EN 60068-2-14, EN 60068-2-30
Operating time

MTBF > 1.000.000 h (25°C), according to SN 29500 (according to IEC 61709)
1)  +70°C +75 °C: erweiterter Temperaturbereich (siehe www.insys-icom.com/de-erweitert/)